Pullers > Internal Extractors > Pullers and Separators
09350000
Brand::Sykes Pickavant
Pulling attachment for Sykes-Pickavant bearing pullers, part numbers 09310000 and 09320000.
Users should also use correct thread protector to fit their bearing puller.
Supplied in carton.
Internal Reach Min - Max: 40-150mm External Reach Max: 100mm
Use with 09310000 and 09320000 Kits* - use 09350100 screw adaptor *Thread Protectors - When ordering an internal pulling attachment users should also order the correct thread protectors to fit their pulling unit or bearing puller kit.
Pulling Unit Part No. 09410000 / Pulling Kit Part No. 09310000 Use thread protectors Part No. 09312000 (2)
Pulling Unit Part No. 09420000 / Pulling Kit Part No. 09320000 Use thread protectors Part No. 09322000 (2)
Pulling Unit Part No. 09430000 / Pulling Kit Part No. 09330000 Use thread protectors Part No. 09332000 (2)
Slide Hammer & Split Collet Extractor Kit
Pullers > Internal Extractors > Pullers and Separators
09580400
Brand::Sykes Pickavant
Internal Extractor Kit
Extract components quickly and efficiently when conventional pullers cannot be used.
Removes bearings, oil seals etc.
Internal Spread Min - Max: 8.5 - 17mm and 19 - 22mm No. of Split Collet Extractors: 4 Upgrade: Twin beam Pulling Unit - 09580500
Split Collet Extractor 8.5 - 10mm
Pullers > Internal Extractors > Pullers and Separators
09581000
Brand::Sykes Pickavant
The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force.
Internal Spread Min - Max: 8.5-10mm
Split Collet Extractor 50-60mm
Pullers > Internal Extractors > Pullers and Separators
09581700
Brand::Sykes Pickavant
The split collet is pushed into the centre of the bearing and then expanded via the hex nut on the end of the collet until a secure grip is achieved. The slide hammer is then attached providing the necessary extracting force.
Internal Spread Min - Max: 50-60mm
1/2IN Female to M8 male converter
Pullers > Internal Extractors > Pullers and Separators
09582000
Brand::Sykes Pickavant
For use with 08542100 Slide Hammer when fitting smaller sized Split Collet Extractors ( 6.5 - 30mm / 09580900 - 09581400 )
Internal Split Collets Extractor Kit
Pullers > Internal Extractors > Pullers and Separators
09580000
Brand::Sykes Pickavant
Extract components quickly and efficiently when conventional pullers cannot be used.
Removes gears, bearings, pinions, oil seals etc.
Can be upgraded for twin/triple leg pulling.
Additional twin beam pulling unit available part no. 09580500.
Supplied in metal case.
Internal Spread Min - Max: 6-60mm No of Split Collet Extractors: 9
Contents: 08542100 1 x Slide Hammer Assembly 09580500 1 x Pulling Unit 09580900 1 x Split Collet Extractor 6.5 - 8mm 09581000 1 x Split Collet Extractor 8.5 - 10mm 09581100 1 x Split Collet Extractor 10 - 12mm 09581200 1 x Split Collet Extractor 12 - 17mm 09581300 1 x Split Collet Extractor 19 - 22mm 09581400 1 x Split Collet Extractor 22 - 30mm 09581500 1 x Split Collet Extractor 30 - 38mm 09581600 1 x Split Collet Extractor 38 - 50mm 09581700 1 x Split Collet Extractor 50 - 60mm 09582000 1 x Adaptor
Slide Hammer & Split Collet Extractor Kit
Pullers > Internal Extractors > Pullers and Separators
09580200
Brand::Sykes Pickavant
Internal Extractor Kit
Extract components quickly and efficiently when conventional pullers cannot be used.
Removes bearings, oil seals etc.
Internal Spread Min - Max: 12-17mm and 19-30mm No. of Split Collet Extractors: 3 Upgrade: Twin beam Pulling Unit - 09580500
Multipull® Blind Housing Bearing Remover Kit
Pullers > Internal Extractors > Pullers and Separators
09800000
Brand::Sykes Pickavant
These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft.
Positive seating allows even tension on inner and outer bearing rings, reducing resistance.
Stabilisers reduce sideways movement and self-centre the puller.
3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter).
Supplied in blow mould case.
Min Spread: 20mm Max Spread: 95mm Adaptor Dia.: 5.5-8mm Puller Reach: 125mm
Multipull® Blind Housing Bearing Remover Kit
Pullers > Internal Extractors > Pullers and Separators
09810000
Brand::Sykes Pickavant
These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft.
Positive seating allows even tension on inner and outer bearing rings, reducing resistance. Stabilisers reduce sideways movement and self-centre the puller. 3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter). Supplied in blow mould case.
Min Spread: 20mm Max Spread: 117mm Adaptor Dia.: 5.5-12.5mm Puller Reach: 415mm
Multipull® Blind Housing Bearing Remover Kit
Pullers > Internal Extractors > Pullers and Separators
09820000
Brand::Sykes Pickavant
These special pullers will remove blind housing bearings without the need to dismantle machinery or remove the running shaft.
Positive seating allows even tension on inner and outer bearing rings, reducing resistance. Stabilisers reduce sideways movement and self-centre the puller. 3 kits cover a wide range of ISO bearings. (To identify kit for bearings without an ISO reference, refer to puller spread and adaptor diameter). Supplied in blow mould case.
Min Spread: 56mm Max Spread: 210mm Adaptor Dia.: 16-31.75mm Puller Reach: 490mm
